My latest challenge was to come up with a way to keep the dust out of the Kinfeld. I didn’t want to make doors with hinges because I was having a hard time finding the right make and size hinge.
Plus I have done this before and the door would sometimes move while I was trying to work on the house.
After a back-and-forth with my good friend Hubert Lengdorfer we came up with a solution. I can’t stress enough how important some brain tennis with a friend is when you are both stumped.
We were pretty proud of ourselves!
So here is what I did. I cut thin strips of basswood and glued thicker strips (a bit thicker than my plexiglass) inside of them to make tracks for the plexiglass.
When I glued the tracks to the house I laid a thick piece of wood (the height I wanted the track to come up over the floor) and held the track flush to it. I used a hot glue gun to get a quick hold.
Then I measured the height for each floor inside the tracks and cut my plexiglass glass. I cut my plexiglass with an X-acto knife a few times and then snapped it apart.
I was going to drill a small hole and put in a knob to help slide the glass but it wasn’t necessary.
The top floor took some more thinking. I was going to use magnets but I could’t find metal strips so I used small strips of velcro. So the glass sits in the track and the tops have velcro tabs.
I have to say I really like this method. I can still see into the house with no obstacles, the dust stays out and I can get inside easily. If I really need to get in there I can remove the glass completely and set it to the side. Otherwise I can slide it enough to do what I need to do and then close it.
Thanks for visiting!
Posts
